• TRX 2.5 Racing Engine™ with tuned exhaust system
• Rear-exhaust racing engine with slide carburetor
• Fully assembled and Ready-To-Race®
• Second generation EZ-Start™ push-button electric starting
• Automatic two-speed shifting in both forward and reverse
• 4WD system with hardened steel ring and pinions; planetary gear
• Differentials; slipper clutch; and new, larger, heavy-duty driveshafts
• 8 adjustable oil-filled shocks
• Over 3 1/2 inches of suspension travel
• Four-wheel disc braking
• Precision ball bearings (28 total)
• 6-color painted and trimmed body included
• 3.2mm, blue anodized, 6061-T6 aluminum chassis
• Heavy-duty 3.5mm Turnbuckles
• 3-Channel Radio System
• Low-Profile 3.8" Maxx chevron tires mounted on mirror-chrome Split-Spoke wheels
• Blazing new body graphics
• Body is fully painted and decaled right out of the box
• Strength-optimized front bulkheads and differential housings
• Receiver box with blue-anodized aluminum crimp nut that incorporate Revo-style body mounts posts
• 40+ mph top speed

• Length: 19.13 in
• Width: 16.25 in
• Wheelbase: 12 in
• Chassis: 3mm aluminum w/composite rails
• Suspension: Fully independent w/8 shocks
• Drive Train: Shaft drive, 2-speed w/ reverse and slipper clutch
• Motor or Engine: TRX 2.5
• Radio: Traxxas TQ 3-channel

• Realistic scale features in a teach-yourself-to-fly plane
• Powerful 480 motor offers great climb rate and power
• 3-channel radio system
• Steerable tail wheel for easy turns on the ground and controlled takeoffs and landings
• Two transmitter-selectable flight modes, ACT "on" or "off"
• Two chargers included: 3-hour AC delta peak wall charger and 1.2A variable rate DC peak charger
• Steel wire pushrods for more precise control and added responsiveness and durability
• Z-Foam™ construction provides excellent durability and is easily repairable with CA
• X-Port™ technology equipped for use with add-on accessories such as Aerial Drop Module™ and Sonic Combat Module™
• Detailed instruction manual and video CD provide instruction
• Full set of replacement and accessory parts available
• One-box purchase—everything needed to fly is included, even the batteries
• A ready-to-fly design—just attach the wing, tail and landing gear and install the battery pack
• An easy-to-install, one-piece wing that provides incredible handling in the wind and smooth flight

Anybody can have a good time flying the new Super Cub RTF.  It comes right out of the box with everything you need included...even batteries for the transmitter.  The Super Cub is equipped with  3-channel control that helps provide a true-scale flying experience.  Throttle, steering and pitch controls allow you to learn the basics of RC flight, safely and simply, while still having a great time flying.  Meanwhile, the instantly recognizable scale Cub design makes you feel as though you're flying a full-size pleasure plane.  In addition, the Super Cub comes with all of the features you expect from HobbyZone, including X-Port™ expandability.  Its durable Z-Foam™ construction makes the Super Cub incredibly strong and easy to repair, and its unique trim scheme makes it look great in the sky and in your hands.

HobbyZone’s Innovative Anti-Crash Technology

The latest breakthrough in RC flight, Anti-Crash Technology (ACT™) makes teaching yourself to fly easier and safer than ever before. With ACT, anyone can fly.

Here’s how it works:

Two sensors on the Super Cub, one on the top and one on the bottom of the fuselage, monitor the position of the plane in relation to the ground. When the plane is flying level, the top sensor sees the sky, while the bottom sees the ground, and they tell the onboard computer that the plane is flying correctly. If the plane enters a dive and the sensors detect that the plane’s orientation is incorrect, the system will automatically correct the control inputs and help prevent the plane from crashing, allowing you time to regain control. ACT lets you fly without worry. And once you’ve gained experience with your Super Cub, you can turn ACT off for more complete control and increased maneuverability.

• Wingspan: 47.75 in (1200mm)
• Overall Length: 32.5 in (825mm)
• Flying Weight: 26 oz (715 g)
• Motor Size: 480 Power
• Radio: 3-channel proportional FM
• Trim Scheme Colors: White, red, and black
• Prop Size: 10 x 8 (PKZ1005)
• Speed Control : Power FET proportional ESC/receiver
• Recommended Battery: 8.4V 1000mAh Ni-MH (stock)
• Elevator: Proportional
• Rudder: Proportional
• Throttle: Proportional
• Approx. Flying Duration: 10–15 minutes
• Gear Ratio: 3:1
• Transmitter Range: 2500 ft
• Available Frequencies: 6 channels on 27MHz
• X-Port: yes
• Anti-Crash Technology: yes
• Charger: Variable rate 1.2A DC peak with LED and 3-hour AC Delta Peak with LED
• Landing Gear: Front landing gear (foam wheels) and steerable tail wheel

• High-speed, high-torque 1880Kv brushless motor
• E-flite® 30A Pro Brushless ESC with Switch Mode BEC
• 3-cell 11.1V 2200mAh Li-Po battery pack
• 2- to 3-cell DC variable rate balancing Li-Po charger
• Li-Po propeller with aluminum adapter
• One-piece Z-Foam™ wing
• Fully proportional 72MHz FM radio system with 3-wire servos
• High and low control rates selectable from transmitter
• Large control surfaces for maximum roll and pitch authority
• Factory-applied Tiger Meet paint scheme and decals
• Vented battery and electronics compartments
• Heavy-duty elevon hinges
• PNP version also available (PKZ4275)

The F-27C Stryker blasts Charge-and-Fly™ performance out of the park with its high-power, 6-pole 1880Kv brushless motor, E-flite 30A Pro Brushless ESC with Switch Mode BEC, and 3-cell 2200mAh Li-Po battery that give it unlimited vertical performance and blistering straight line speeds in excess of 80 mph. To handle the abrupt wing loading changes of aggressive high-speed aerobatics without getting bent out of shape, ParkZone has molded the F-27C from its tough, lightweight Z-Foam™ material. In the air, you can choose between high rate for dizzying pitch and roll rates, and low rate for smooth control response during paint-peeling high-speed passes—all with the flip of a transmitter switch.

If you’re looking for a spine-tingling, adrenaline pumping Charge-and-Fly experience that’s unlike anything else out there, this is it. 

You get everything you need to go from box to sky in as little time as it takes to charge a battery pack. No gluing. No painting. No radio installation. No hassles.

Just Fly®.

• Wingspan: 37 in (940mm)
• Overall Length: 27 in (690mm)
• Flying Weight: 22 oz (620 g)
• Motor Size: 6-pole brushless direct-drive, 1880Kv
• Radio: ParkZone 4-channel FM 72MHz
• Servos: Industry standard 3-wire
• Trim Scheme Colors: Grey, Black, Yellow
• CG (center of gravity): Approx 6 1/2" forward from trailing edge
• Prop Size: 6 x 4
• Speed Control : E-flite 30A Pro Brushless ESC with Switch Mode BEC (EFLA1030)
• Recommended Battery: 3-cell 11.1V 2200mAh Li-Po included
• Approx. Flying Duration: 12–15 minutes
• Available Frequencies: 6 channels on 72MHz
• Charger: 2- to 3-cell variable rate DC balancing charger
• Approx. Flying Speed: 80+ mph

• Complete competition ready kit
• Crawler prefered driveshaft angle and castor as well as class leading steering throw
• Aluminum Chassis plates with a molded nylon skid plate
• Ultra compact and lightweight transmission
• Full time locked four wheel drive
• Full Ball bearings
• Overall gear ratio range from 15:1 to 74:1
• 2.6:1, center mounted, Single-speed Transmission
• Locked style (spool) Differentials
• 70° of Articulation
• Universal front and rear Drive Shafts

The Axial AX10 Scorpion 1/10 Rock Crawler Kit (4WD Electric) is the first of its kind. The kit was designed from the ground up, and every detail was thought through to provide a competition level base kit to work with. Previously the only way to build a competition capable rock crawler was to buy bits and pieces of several different kits here'n'there. This long and sometimes frustrating process would take as long as several months just to get the right parts together before you could even start the build. Now you can get everything in one box, and within a matter of a few hours build-time you'll be able to hit the rocks with your competition ready AX10 Scorpion Rock Crawler!

• Type: Rock Crawler
• Scale: 1/10
• Length: 438mm (17.25”)
• Width: 254mm (10”)
• Wheelbase: 304mm~320mm (12”~12.6”)
• Weight: 1588g (3.5 lbs)
• Chassis: Aluminum and molded nylon
• Suspension: 3 link
• Tire Type: Axial 2.2 Rock Lizards
• Motor or Engine: 540/550 Size (required)
• Speed Control: required
• Radio: 2 Channel (required)
• Servos: 1 (Standard Size, required)
• Batteries: 7.2v Stick Pack (required)
• Wheel Size: Axial 2.2 Rockster Beadlocks
• Kit/RTR: Kit

• Diesel locomotive with operating headlight
• Three freight cars including a caboose
• 36" circle of Steel E-Z Track
• Power pack and speed controller included
• Illustrated train set instruction manual

 Already a leader in HO trains, Bachmann's Exclusive E-Z Track System has made them an industry standard. Bachmann offering an expanded line of model railroading products for children of all ages. From traditional electric train sets, locomotives, and rolling stock to products that are on the cutting-edge of digital technology, Bachmann is leading the way into a new century of electric trains. Bachman trains and model railroading products promise to bring out the child in all of us.

• Gender: Male
• Minimum Age Recommendation: 8 years
• Experience Level: No Experience Necessary
• Recommended Environment: Indoor
• Assembly Time: Less than 1 Hour
• Is Assembly Required: Yes
• Number of Pieces: 18

• Water-cooled motor lowers running temperatures for increased motor life
• Steerable drive system offers better speed and handling
• Electronic speed control with reverse
• Pro Boat 2-channel AM pistol-grip radio system
• Magnetic hatch keeps electronics dry
• Catamaran hull provides stable handling in rough waters

The Pro Boat® Apache™ 24 RTR features a high-performance, water-cooled 550 motor that's engineered to provide plenty of power and torque for long, full-throttle runs. Its durable catamarn hull and steerable drive system allow the Apache 24 to cut turns at top speed and still handle beautifully. There's no question that boating aficionados will be in a hurry to add this Pro Boat beauty to their fleet.

• Length: 24 in (609mm)
• Beam: 8.3 in (210mm)
• Motor Size: 550-size
• Radio: Pro Boat 2-channel pistol-grip AM 27MHz (installed)
• Speed Control: Waterproof Electronic with Reverse
• Hull Material: ABS Plastic
• Hull Type: Catamaran
• Drive System: Steerable Direct Drive System
• Recommended Environment: Outdoor

• Includes everything you need to fly—radio, batteries and charger
• Counter-rotating blades for ultra-stable flight
• Powerful micro motor for quick acceleration and fast climb rate
• Built-in powerful 3.7V Li-Po battery—just charge and fly
• 3-channel radio system for climb/descent, steering and forward flight
• Functional landing gear for taxiing, takeoff and landing
• LED navigation and search lights increase scale appearance
• Includes helipad with functional landing lights

The Nitewatch Aerolite 2 helicopter comes with everything needed for realistic rescue helicopter action.  The Nitewatch includes a durable foam body,  complete with LED rescue lights, functional landing gear and lighted helipad.

The Nitewatch comes ready to fly with everything included—even batteries.  Its durable construction ensures long-lasting enjoyment.  If needed, replacement parts are easily available.  Just charge the battery, and you're ready to fly.

• Minimum Age Recommendation: 14 years

• Bright LED cannon fire and recoil
• Real battle sounds
• Climb, crawl and charge over obstacles
• Take command with full-function controls
• Spin, turn and maneuver almost anywhere
• Transmitter and batteries included
• Available in two frequencies

The Sparc! Mini Tank is a fully mobile, realistic-looking mini-rendition of the  M1A2 Abrams tank. And it can take just about anything you put in front of it…pens, notebooks, no problem.  Full-function controls allow you to maneuver forward, backward, left, right, and spin 360 degrees.  Adding to its realism is its firing sound, LED illumination and post-firing recoil. With replacement parts also available, this tank is more than just a toy. The Mini-Tank gives you both the look, sound and feel of a full military tank ready for battle. 

The Mini Abrams M1A2 Tank comes with everything you need to get started—even the batteries.  Just install the batteries, and go.

• Minimum Age Recommendation: 8 years

• 27 Running Feet of 4 lane track
• Includes 4 Super G+ Indy style race cars
• 2 UL wall power packs
• Guardrails
• Pit building and grandstand building
• Over/under section
• 4 Pro-Klass controllers

This is one exciting track. This is our best selling set, and with good reason. Not only is the size just right for racing, there are numerous (16) alternate layouts that you can make. Start a racing club with this set today.

• Now includes aluminum head/hub, over-current protection PTC resettable fuse devices, 3-in-1 control unit and Spektrum™ AR6100e receiver
• Flight ready—no assembly required
• Test flown at the factory to ensure proper setup out of the box
• Interference-free, 5-channel E-flite® transmitter with built-in Spektrum 2.4GHz DSM® technology
• Coaxial, counter-rotating rotor blades that make hovering easy
• Two feather-light S60 Super Sub-Micro servos—just 6.0 grams each
• 2-cell 7.4V 800mAh LiPo battery pack with Charge Protection Circuitry
• 2–3 cell DC LiPo balancing charger and AC adapter
• Most parts compatible with the Blade® CX

• Main Rotor Diameter: 13.6 in (345mm)
• Gross Weight: 8.0 oz (227 g) with battery
• Length: 16.42 in (417mm)
• Motor Size: 180 (2 installed)
• Control System: 2.4GHz DSM 5-channel (included), 4-in-1 receiver/mixer/ESC/gyro (installed), S60 Super Sub-Micro servos (2 installed)

ParkZone’s Typhoon™ 2 3D is for experienced RC pilots who want the thrills of unlimited action in an electric park flyer without the hassles of building one. Equipped with oversized control surfaces and a powerful ParkZone™ BL400-15T brushless motor and digital metal gear servos, it can perform the most aggressive 3D maneuvers imaginable with laser precision and power to spare. Hovers, harriers, torque-rolls, waterfalls—the Typhoon 2 does them all. The removable side force generators can be attached with just eight screws. And because the wings and fuselage are molded from ParkZone’s super-strong, feather-light Z-foam™ material, it can handle the punishment of these high-energy 3D aerobatics without getting bent out of shape.

The Typhoon 2 3D Plug-N-Play allows for the convenience of a Ready-To-Fly and the versatility of an Almost-Ready-to-Fly. In order to complete the Typhoon, your customers will need: transmitter (4 channel minimum), receiver, battery and charger. Then, after attaching a propeller, the Typhoon 2 is ready to perform their favorite 3D maneuvers.

• Wingspan: 39.4 in (1000mm)
• Overall Length: 36.6 in (935mm)
• Flying Weight: 26 oz (740 g)
• Motor Size: BL400-15T brushless, gear reduced
• Servos: 3-wire digital servos
• CG (center of gravity): 3.50 in (95 mm) back from the leading edge of the wing
• Speed Control : E-Flite 30A Pro Brushless ESC with Switch Mode BEC (EFLA1030)
• Recommended Battery: Minimum 3-cell 1800mAh Li-Po battery (not included)

• Highly Accurate Flight Models and Aerodynamics
• Realistic Ground Handling
• Realistic Damage Modeling
• More Than 25 Different Flying Sites
• State-of-the-Art Graphics
• Extensive 3D Flying Field Viewing Options
• Flight Recorder
• Mode 2 Controller

FS One Precision RC Flight Simulator includes:
• TacCon™ controller
• 4 Installation CDs
• FS One USB interface
• JR and HiTec/Futaba (**round plug) adapter cords
• Color-coded key command card
• “Quick Start” guide

  ** Using Futaba transmitters with the micro plug will require HANS3030 (sold separately). Airtronics adapter (HANS3020) also available.

Highly Accurate Flight Models and Aerodynamics
• Airplane flight models developed by renowned aerodynamicist, Michael Selig, PhD
• Realistic simulations of RC’s most popular airplanes, helis, sailplanes,
jets and park flyers
• Extensive high-alpha (high angle of attack) "post stall" effects

High-fidelity aerodynamic modeling that accurately depicts the effects encountered during 3D maneuvers, such as:
• Hovers
• Walls
• Knife Edge/Knife-Edge Spins
• Harriers
• Elevators
• Spins
• Blenders
• Parachutes
• Waterfalls
• Torque Rolls
• Rolling Harriers
• Lomchevaks
• Realistic stalls, including tip stalls
• Engine/propeller torque and gyroscopic effects
• Ground effect and propwash effects
• User-definable wind, thermal, and turbulence effects

Realistic Ground Handling
• Grass and pavement surfaces modeled to produce different effects on handling
• Aircraft can cartwheel and tumble

Realistic Damage Modeling
• Effects of impact with ground and other objects modeled
• Airplane parts can break off when damaged

More Than 25 Different Flying Sites
• Both photopanoramic and 3D flying sites
• Five 3D sites
• 20+ photorealistic panoramic sites

State-of-the-Art Graphics
• Highly detailed, photorealistic 3D aircraft models
• Movable control surfaces, rotating wheels, flexing gear, etc.
• Exceptionally realistic fields created using satellite and aerial photography
• Reflective aircraft surfaces
• User selectable photorealistic skyscapes
• Sun lens-flare effects
• Smoke and exhaust effects

Extensive 3D Flying Field Viewing Options
• Pilot on ground
• Chase view
• Full zoom in/out, move in/out features
• Padlock to target/objects
• Lag and lock cameras
• Freeze camera with tracking

Sailplane Features
• Hand launch
• HiStart (bungee line)
• Winch
• Tow plane (tow up the sailplane)
• Variometer support
• Thermal soaring
• Slope soaring
• Dynamic soaring

Training
• Flight training modules and tips by world-class RC pilots

Flight Recorder
• Save your greatest FS One moments and share them
• Multiple aircraft playback support
• Fly with recorded aircraft
• Extensive video playback controls

Joystick/Transmitter Interface
• Interface works with most industry transmitters
• TacCon controller that simulates 7-channel transmitter
• Transmitter interface for use with real transmitters of up to 8 channels
• Keyboard support provided for additional aircraft controls
• Support for standard game joysticks included
• Built-in two-pilot support, useful for towing sailplanes and pylon racing

Gaming Features
• Bomb Drop – Hit aerial or ground targets with bombs or bottle rockets
• Pylon Racing – Go head-to-head against another pilot in two-player mode,
race against the clock or race recordings of your best laps.

Included Airplanes:
HobbyZone® Aerobird Xtreme™
Hangar 9® Alpha™ 40 (Trainer)
E-flite® Ascent™ Park Glider
BVM Bobcat XL
Hangar 9 Cessna 182 Skylane™
Hangar 9 F4U Corsair 60
Hangar 9 Edge 540 33%
HobbyZone Firebird Commander®

Hangar 9 Funtana S™ 3D 40
Hangar 9 Funtana S 3D 90
ParkZone® J-3 Cub
ParkZone Slo-V™
BVM MiG-15
Hangar 9 P-51 150
Piper Pawnee
ParkZone F-27B Stryker™
Swift
SwiftE
Hangar 9 T-34 Mentor 40
Hangar 9 AT-6 Texan 60
E-flite Tribute 3D Profile
Hangar 9 Twist™ 3D 40
E-flite Ultimate 3D Profile
Hangar 9 Ultimate TOC 46%
Hangar 9 Ultra Stick™ Lite 120
Tracon
TraconE
TraconE-DS
TraconK2
TraconK2E

Included Helicopters:
E-flite Blade® CP Micro Heli
E-flite Blade CP w/Training Gear
E-flite Blade CX Coaxial Micro Heli
E-flite Blade CX w/Training Gear
JR® Voyager™ E 3D
JR Voyager E CCPM Heli
JR Voyager 50
JR Voyager 50 (Trainer)
Bell Long Ranger ™
JR Vigor™
FS One Jet Copter SX

• Steerable nose gear and fixed main landing gear allow for smooth takeoffs and landings
• 480, 960Kv outrunner brushless power system
• E-flite 30A brushless ESC
• Durable Z-Foam™ construction
• Authentic paint scheme, decals and pilot figure

The T-28 Trojan was a piston-powered U.S. military trainer used in the 1950s through the early 1970s. The original Trojan had a frameless canopy and an impressive engine that gave it a top speed exceeding 280 mph. Now you can pilot an electric scale replica of this historical warbird. Equipped with an outrunner brushless motor, ParkZone’s T-28 Trojan is a powerful, high performance aircraft. The Trojan is perfect for the experienced pilot who would rather spend his time flying a mighty scale replica airplane than building one.

The T-28 Trojan's Plug-N-Play® version allows for the convenience of a Ready-To-Fly and the versatility of an Almost-Ready-to-Fly—just plug in your receiver and fly! You can fly the T-28 Trojan using any major brand of receiver and transmitter. Simply attach a propeller and plug in a receiver of four channels or more, and it’s ready for action. 

Plug-N-Play convenience, outstanding flight performance and beautiful scale detail—with the T-28 Trojan you get it all.

All that's needed to complete:

Radio, battery, charger, and receiver

• Wingspan: 44 in (1118mm)
• Overall Length: 36 in (914mm)
• Flying Weight: 30 oz (875 g)
• Motor Size: PKZ 480 960Kv outrunner brushless motor
• Radio: Minimum 4-channel recommended (not included)
• Servos: 3-wire servos (included)
• Trim Scheme Colors: White with black, red, and blue
• Prop Size: 9.5 x 7.5
• Speed Control : E-flite 30A Pro Brushless ESC with Switch Mode BEC (EFLA1030)
• Recommended Battery: Minimum 3-cell 1800mAh LiPo battery (not included)
• X-Port: No
• Landing Gear: Wire nose gear and main gear, foam wheels
• Steering: Steerable nose gear

• Brushless electric technology for fast, reliable and convenient performance
• Water-cooled A3630-1500 brushless motor and ESC keep electronics cool
• Steerable drive system for superior handling
• High-quality, prepainted fiberglass composite catamaran hull
• Pro Boat 2-channel AM 27MHz pistol-grip radio system installed
• Magnetic hatch and quick access radio box helps keep electronics dry
• Programmable ESC allow you to customize settings and use LiPo batteries

Pro Boat has done it again with its Blackjack 26 Brushless EP RTR.  With incredible styling and high-performance handling known to the Pro Boat brand, the Blackjack 26 Brushless is the perfect boat if you want extreme speed but don't want to hassle with nitro.

Like all other Pro Boat models, the Blackjack 26 Brushless EP RTR is completely ready to run.  It comes with a programmable ESC for fast, reliable and convenient performance.  The steerable drive system increases the superior handling and low maintenance of the Blackjack 26 Brushless EP RTR.

An installed  Pro Boat pistol-grip AM radio and a high-quality, painted fiberglass hull add to the great looks, reliability and high-performance of the new Pro Boat® Blackjack™ 26 Brushless EP RTR.

• Length: 26 7/8 in (660mm)
• Beam: 8 3/8 in (210mm)
• Motor Size: A3630-1500 water-cooled brushless
• Radio: Pro Boat 2-channel AM 27MHz
• Speed Control: Water-cooled 45A programmable brushless
• Hull Material: Fiberglass composite
• Trim Scheme Colors: Metallic blue, silver and white
• Prop Size: 1.6 X 2.5 in Composite
• Hull Type: Catamaran
• Battery: 2-7.2V sub-C packs with Deans connectors (required to complete)

• Brushless electric power system allows for speeds of 30+ mph
• Offset rudder and adjustable propeller strut for improved handling
• Magnetic hatch with sealed radio box
• Authentic "Lunar Reactor" trim scheme
• Includes installed Pro Boat 2-channel 27MHz pistol-grip radio system
• Fiberglass composite deep-V hull for superior handling in rough conditions
• Water-cooled brushless ESC offers unsurpassed reliability
• Build under license from Formula/Thunderbird Products
• Runs on Dual 7.2V battery packs (required)

The Formula FASTech is one of the most eye-catching performance boats on the water, and Pro Boat's scale replica is no different.  Powered by a potent brushless electric motor and electronic speed control, the FASTech quickly reaches speeds of 30+ mph.  The offset rudder and adjustable propeller strut allow precise handling in a variety of water conditions, and the magnetic hatch allows quick access to electrical components when you need it.  Add the authentic "Lunar Reactor" trim scheme from Formula, and it's easy to see that there's absolutely nothing else like it on the water!

Formula, FASTech and Lunar Reactor trim scheme are trademarks of Formula/Thunderbird Products. Used under license by Horizon Hobby, Inc.

• Length: 26.75 in (679mm)
• Beam: 7.9 in (201mm)
• Motor Size: A3630-1500 Water-cooled Brushless
• Radio: Pro Boat 2-Channel AM (preinstalled)
• Speed Control: 45-amp BL Water-cooled Programmable
• Hull Material: Fiberglass Composite
• Hull Type: Deep-V
• Battery: 6 cell (7.2V) stick packs with Deans plug (2 required)
• Drive System: Flexshaft; Adjustable Propeller Strut; Offset Rudder

• 2.4GHz radio technology eliminates interference so you can fly multiple planes at the same time
• Ready-to-fly right from the box – everything you need is included inside, even the batteries
• Slow-flying innovation and micro size allow experienced pilots to confidently fly the Ember in a small space
• Great for 3-channel aerobatics
• Micro 3.7V 70mAh Li-Po battery
• Great looking without any gluing or painting required
• Throttle, rudder and elevator provide true 3-channel flight and maneuverability
• Fully proportional, super lightweight servo motors with feedback potentiometers give you precise control
• Single-cell Li-Po charger conveniently charges the battery in only 15 to 20 minutes

ParkZone’s Etomic family of innovative ultra-micro flyers makes micro flight a reality for everyone. Proportional, multi-channel, 2.4GHz radio technology provides precise control for amazing, ready-to-fly indoor fun.

Performance, control and innovation – a one-of-a-kind ultra-micro experience!

Boasting a remarkably compact design and slow-flying capabilities perfect for indoor fun (or outdoors on a calm day), the Ember™ is the first member of ParkZone’s innovative Etomic family of RTF ultra-micro aircraft. Weighing less than an ounce, seasoned pilots will be able to handle this sleek micro-flyer in small spaces with ease and confidence, while those new to micro will be given an RC experience unlike any other. The Ember’s exceptional 2.4GHz radio technology, which eliminates interference and allows you to fly multiple planes at the same time, is paired with 3-channel capability to give you precise control. Meanwhile, the plane’s light wing loading allows for the kind of slow flight you’ll have to see to believe.

The Ember’s radio system has already been bound and everything you need to get started is included inside, even the batteries. After installing the AA batteries in the charger, simply charge the flight battery (which takes approximately 20 minutes) and you’ll soon be enjoying a micro experience highlighted by extended flight times and maximum performance, along with the ability to perform 3-channel aerobatics sure to put a smile on your face. From sharp looks to instant enjoyment, the Ember delivers on everything you’ve grown to love about ParkZone’s products and their unique niche in the world of ultra-lightweight aircraft.

• Wingspan: 16 in (411mm)
• Overall Length: 13-1/2 in (345mm)
• Flying Weight: 0.6 oz (18 g)
• Radio: 3-channel 2.4GHz (included)
• CG (center of gravity): 37mm (+/- 2mm) back from leading edge of the wing
• Recommended Battery: 3.7V 70mAh Li-Po battery (included)
• Experience Level: Intermediate
• Recommended Environment: Indoor
• Assembly Time: Less than 1 Hour
• Is Assembly Required: No

• Tall 6.3" all-terrain Maxx-sized tires mounted on 3.8" mirror-chrome Hurricane wheels
• Maxx® Resonator™ dyno-tuned dual-chamber pipe
• Large, high-volume dual-stage air filter
• +30mm extended wheelbase aluminum chassis
• Heavy-duty chassis braces & transmission skid plate
• Sealed, tunable limited-slip differentials
• Heavy-duty bellcrank steering system with an integrated servo saver
• Digital high-torque steering servo delivers 125 oz-in of torque with a 0.16-sec transit time
• Revo-Spec forward-only, autoshifting two-speed transmisson
• Critical chassis and driveline components optimized for strength and reliability
• Dependable double-shear connections used on all pivot points
• Tough new body with blazing graphics
• Additional Features
• TRX 3.3 Racing Engine with EZ-Start
• Torque-Control slipper & powerful 42mm disc brake
• Strengthened bulkheads with steel X-braces
• Revo-Spec sealed drivetrain & pivot ball suspension
• Rubber-sealed ball bearings & full hex hardware
• Eight oil-filled Ultra Shocks™
• Adjustable four-position wheelie bar

The New T-Maxx® 3.3 is the biggest, meanest T-Maxx ever. It’s more of everything that has made the legendary T-Maxx the #1 best-selling nitro monster truck. The new T-Maxx is built bigger with giant, 6.3-inch tall tires and a 30mm longer wheelbase. The huge Maxx® 4x4 stance completely dominates big, rough terrain. The TRX 3.3 Racing Engine is packing more power with a 16% peak power boost from the dyno-tuned aluminum Resonator™ pipe and better breathing from the high-volume dual-stage air filter. The massive wheelies and screaming 45+mph top speed tells you this engine is ready to unlock a whole new level of Extreme Power and monster-thrashing fun. The new T-Maxx 3.3 driveline is refined and strengthened with Revo®-Spec sealed front and rear differentials and beefy center driveshafts. A powerful digital high-torque servo drives the new bellcrank steering system with an integrated servo saver. The forward-only two-speed tranny is super strong with low-mass internals for high-revving performance. And of course, it’s built Traxxas Tough! Traxxas engineers strengthened critical areas to further enhance the egendary toughness. Meaty new chassis braces and an all-new skid plate add rock- solid rigidity. The new T-Maxx 3.3 is the next BIG thing in high-flying monster truck fun.

• Type: 4WD Nitro Monster Truck
• Length: 21.213in (539 mm)
• Wheelbase: 13.2 in (335 mm)
• Weight: 160 oz (4.536 kg) RTR no fuel
• Drive Train: Shaft-Driven 4WD
• Motor or Engine: TRX® 3.3
• Radio: Traxxas TQ-3™
• Fuel Tank Capacity: 125cc

• 100% assembled and test-flown at the factory
• Includes everything you need to fly, right from the box
• HP6DSM 6-channel transmitter with full range Spektrum™ 2.4GHz DSM2™ technology, flight mode, throttle hold, dual rate switches and more
• Factory-installed Spektrum AR6100 receiver, 2-in-1 control unit and DS75 digital sub-micro servos offer precise and powerful control
• High-power 370 main motor with heat sink provides brushless-like performance
• Direct-drive N60 tail motor and G110 micro heading lock gyro offer incredibly locked-in tail control
• 3S 11.1V 800mAh LiPo battery and DC LiPo balancing charger
• CCPM control and Bell-Hiller mixing offer lightning-fast cyclic response and full 3D aerobatic capability
• Plug-N-Play® compatibility with brushless power systems

The E-flite® Blade® CP Pro 2 has just taken the RTF 3D micro electric helicopter to the next level.  It's the industry’s only fully 3D-capable RTF micro heli that performs aerobatics like backward hurricanes and piro flips right out of the box.  Loaded with incredible features and an unmatched level of out-of-the-box 3D performance, the Blade CP Pro 2 is a 3D machine to reckon with.    

The high-power 370 main motor offers brushless-like performance, while the direct-drive N60 tail motor and G110 heading lock gyro offer incredibly locked-in tail control. The included E-flite HP6DSM 6-channel transmitter features full range Spektrum™ 2.4GHz DSM2™ technology, that, along with the factory-installed Spektrum AR6100 receiver, provides the locked-in, interference-free performance DSM® is known for. A 2-in-1 control unit offers complete control of the main and tail motors, while three DS75 digtal sub-micro servos deliver precise CCPM control of the Bell-Hiller mixing equipped rotor head. 

From its feature-packed design to the level of quality and performance, intermediate to advanced pilots will enjoy testing their aerobatic skills on the Blade CP Pro 2.  Never before has so much 3D aerobatic capability been available in an RTF micro CP class helicopter—right out of the box, no additional parts or upgrades required.

• Type: RTF Collective Pitch Electric Micro Heli
• Main Rotor Diameter: 20.3 in (515mm)
• Tail Rotor Diameter: 3.2 in (80mm)
• Gross Weight: RTF with battery, 11.5 oz (325 g)
• Length: 20.7 in (525mm)
• Motor Size: High-power 370 main, direct-drive N60 tail
• Kit/ARF/RTF: RTF
• Control System: E-flite HP6DSM 2.4GHz DSM2™ transmitter (included), Spektrum™ AR6100 Microlite receiver (installed), 2-in-1 contol unit (installed), G110 micro heading lock gyro (installed), DS75H digital sub-micro servos (3 installed), 120-degree CCPM

• Can be flown almost anywhere—a living room, a basement, even a garage
• Spektrum DSM2 radio technology eliminates interference so you can fly multiple planes at the same time
• Ready-to-fly right from the box—everything you need is included inside, even the batteries
• Single-cell Li-Po charger safely and conveniently charges the battery in approximately 20 minutes
• Great-looking without any gluing or painting required
• Throttle, rudder and elevator provide true 3-channel flight and maneuverability
• Fully proportional, super lightweight servo motors with feedback potentiometers give you precise control
• Fuselage and tail/wing framework made of lightweight carbon; wing and tail surfaces covered in lightweight and durable PET film
• Also available in a Bind-N-Fly® version (PKZ3380)

Remarkable DSM2 radio technology makes the ready-to-fly Vapor a plane just about anyone can pilot with confidence. As ParkZone’s slowest and lightest fixed-wing aircraft, it can be flown almost anywhere – a living room, a basement, even a conference room at work. Incredibly compact and loaded with all of RC’s best innovations, the Vapor offers a one-of-a-kind indoor experience, while the DSM2 radio eliminates any risk of interference and allows you to fly multiple planes at the same time. No matter what your skill level is (even if you have never flown RC before), it will be an entertaining and easy-to-fly option during those times when you can’t make it out to a park or flying field.

The DSM2 transmitter, charger and batteries are all included inside the box, making it easy to get the Vapor off the ground. The Vapor is the second member of ParkZone’s tremendous Etomic family of ultra-micro aircraft. Its carbon fiber composition represents the ultimate in lightweight design, helping it deliver the best in flight quality, value and, most importantly, fun. Its single-cell Li-Po battery charges in approximately 20 minutes and gives you extended flight times of nearly 15 minutes, while 3-channel control provides the precision needed for flying in those tight spaces indoors. Featuring the state-of-the-art looks and instant enjoyment people love about ParkZone’s products, the Vapor will be a stylish and unique addition to your fleet, or the perfect introduction to the world of RC flight.

• Wingspan: 14.75 in (375mm)
• Overall Length: 15.25 in (387mm)
• Flying Weight: 0.5 oz (15 g)
• Radio: 3-channel 2.4GHz w/Spektrum DSM2 technology (included)
• CG (center of gravity): Front wing mount 23mm back from front edge of fuselage; battery tray 13mm back from front wing mount
• Recommended Battery: 3.7V 70mAh Li-Po battery (included)
• Charger: DC single-cell Li-Po
• Minimum Age Recommendation: 14 years
• Experience Level: Intermediate
• Recommended Environment: Indoor
• Assembly Time: Less than 1 Hour
• Is Assembly Required: No

• Compatible with all transmitters using DSM2™ technology
• Can be flown almost anywhere—a living room, a basement, even a garage
• Slow-flying innovation and ultra-compact size help you perform incredible indoor maneuvers
• Everything except the transmitter is included
• Micro 3.7V 70mAh LiPo battery
• Single-cell LiPo charger safely and conveniently charges the battery in approximately 20 minutes
• Great looking without any gluing or painting required
• Throttle, rudder and elevator provide true 3-channel flight and maneuverability
• Fully proportional, super lightweight servo motors with feedback potentiometers for precise control
• Fuselage and tail/wing framework made of lightweight carbon; wing and tail surfaces covered in lightweight and durable PET film
• Also available in a RTF version (PKZ3300)

Compatible with any Spektrum™ DSM2™ transmitter, the Vapor™ is a stylish Bind-N-Fly™ plane that offers pilots a one-of-a-kind indoor experience. As ParkZone’s slowest and lightest fixed-wing aircraft, it can be flown almost anywhere—a living room, a basement, even a conference room at work. Incredibly compact and loaded with all of RC’s best innovations, owners of DSM2 transmitters (including the DSM2 radio utilized by E-flite’s Blade® CX2) can have the Vapor airborne in no time, making it the perfect alternative for those times when you can’t make it out to a park or flying field.

The Vapor is the second member of ParkZone’s tremendous Etomic™ family of ultra-micro aircraft. Its carbon fiber composition represents the ultimate in lightweight design, helping it deliver the best in flight quality, value and, most importantly, fun. Its single-cell LiPo battery charges in approximately 20 minutes and gives you extended flight times of nearly 15 minutes, while 3-channel control provides the precision needed for flying in those tight spaces indoors. All you need to do is bind your DSM2 transmitter and your adventure into the new era of RC flight begins.

Amazingly easy to fly, the Vapor features the state-of-the-art looks and reliability people love about ParkZone products, making it a unique addition to your fleet.

• Wingspan: 14.75 in (375mm)
• Overall Length: 15.25 in (387mm)
• Flying Weight: 0.5 oz (15 g)
• CG (center of gravity): Front wing mount 23mm back from front edge of fuselage; battery tray 13mm back from front wing mount
• Recommended Battery: 3.7V 70mAh LiPo battery (included)
• Charger: DC single-cell LiPo (included)
• Minimum Age Recommendation: 14 years
• Experience Level: Intermediate
• Recommended Environment: Indoor
• Assembly Time: Less than 1 Hour
• Is Assembly Required: No

• Amazing new chassis design with integrated dual battery compartments
• Quick release battery doors
• Battery cooling vents
• Scalable battery compartments from sport packs to brutal 6S LiPo power
• Smooth center skid plate shields the driveline
• Weather-sealed electronics for running in water, mud, and snow.
• EVX-2 16.8 volt FWD/REV Electronic Speed Control
• Dual Titan 550 motors
• Dual digital waterproof steering servos deliver 125 oz-in of torque & 0.16-sec transit time
• Hard-anodized Telfon-coated shock bodies with TiN coated shock shafts
• 4-Channel micro receiver
• Brushless ready 2-speed transmission with metal center idler gear
• Sealed pivot ball suspension
• Sealed limited slip differentials
• Dual-servo steering system
• Hex hardware throughout
• 3.8" black-chrome Gemini wheels
• 3.8" Talon tires
• Adjustable rear wing
• Compatible with many Revo Platinum upgrades
• RTR

Once again, Traxxas has broken new ground with unprecedented innovation and performance. The New E-Revo is the most advanced electric racing monster truck ever created. The 6-time National Champion REVO is already the pinnacle of engineering in the Nitro arena and now E-Revo breaks open an entire new category that embraces today’s electric technology. Built from the start to be electric, E-Revo harnesses all the advantages that electric power brings to the race. The integrated battery compartments position the weight of the batteries as low and as close to the centerline of the chassis as possible. A smooth center skid plate adds strength and beauty while it shields critical driveline components. The low center of gravity, balanced weight distribution, and incredible torsional rigidity yields the best handling Revo platform ever. The proven 16.8 volt EVX-2 power system delivers massive torque through twin Titan 550 motors. Always looking ahead, Traxxas engineers made E-Revo truly brushless ready with a driveline that’s been proven tough for durability at the extreme with brutal 50+mph 6S LiPo power and custom brushless motors from the aftermarket. The unique battery compartments are easily scalable with built-in features to adapt for multiple battery configurations. A separate motor plate was engineered for a clean, low-slung single motor installation. Of course, E-Revo retains all the benefits of the exclusive linkage based suspension system including the most suspension travel possible, tunable progressive damping, independent ride height adjustment, and the absolute highest level of control for any situation. Hard-anodized Teflon coated shocks with TiN shafts, and dual digital waterproof steering servos have been added to further sharpen the handling. Off the racetrack, E-Revo is our most recent model to be equipped with exclusive fully water-sealed electronics. Only Traxxas makes it possible to run through water, mud, snow and other wet conditions. E-Revo is offered fully assembled and Ready-To-Race with the TQ radio system and EVX-2 electronic speed control

• Type: 4WD Monster Truck
• Scale: 1/10
• Length: 22.91" (582mm)
• Width: 16.38" (416mm)
• Wheelbase: 14.1 inches (358mm)
• Weight: 151oz (4.29kg)
• Chassis: Molded Composite Nylon Tub
• Drive Train: Shaft-Driven 4WD
• Tire Type: Talon™ (5.75" x 3.8")
• Motor or Engine: Dual Titan® 550, Fan Cooled (21-turn)
• Speed Control: EVX-2 Forward/Reverse/Brake
• Radio: Traxxas TQ
• Batteries: Two NiCad or NiMH (6 or 7 cell stick)(not included)
• Speed: 30+mph
• Gear Pitch: 32-Pitch
• Wheel Size: 3.8" Gemini™ (black-chrome)
• Kit/RTR: RTR
• Recommended Environment: Indoor/Outdoor

• Scale dimensions and looks of actual short-course off-road race trucks
• Powerful Titan 12T 550 modified motor w/ internal cooling fan
• Race in dirt, mud and water
• XL-5 Watertight Electronic Speed Control
• Traxxas High-Current Connector
• Digital high-torque waterproof steering servo
• Speed control and receiver are securely bolted to the chassis
• 13.2 inch wheelbase, over 3.5 inches of ground clearance
• Easy access battery compartment
• Accepts 6-and 7-cell flat packs and 7-cell hump packs
• Chassis nerf bars absorb impact and support the body
• Scale front and rear tub-style bumpers
• Truly brushless ready Magnum 272 metal-gear transmission with ball bearings
• Revo-spec Torque-Control slipper clutch system
• Captured rod ends won't pop off for superior durability
• Precision hex hardware throughout
• Efficient rubber-sealed ball bearings
• Fully adjustable Ultra Shocks with X-ring technology
• Scale all-terrain tires include performance foam inserts and pre-glued satin finish 2.2" wheels
• 30+mph using included opt. 23T pinion gear
• TQ Radio System

The new Traxxas Slash Short-Course Race Truck puts you in the drivers seat for intense fender-to-fender, high-flying off-road action. The full-scale Short-Course Race Trucks embody the spirit of Traxxas R/C with their extreme 800+ horsepower racing engines full-throttle, dirt-roosting power slides, giant suspension travel, and Supercross-style big-air jumps. The Traxxas Slash brings all the action home so you can experience the high-speed head-to-head competition at the track or in your own backyard. The Slash was inspired by the CORR™ (Championship Off-Road Racing) Pro-2™ class. The 4-wheel independent suspension has been carefully tuned to replicate the Pro-2 driving and handling experience as closely as possible. The tires use advanced tread design and sophisticated rubber compounds to provide incredible grip off-road with enough versatility to also perform well on concrete and asphalt. The fenders cover the tires for wheel-to-wheel racing without getting tangled up. The Traxxas Slash is only the second Ready-To-Race® model ever to come equipped with our exclusive watertight, sealed electronics. They provide the freedom to drive where you want to drive through water, mud, snow, and other wet-running conditions that wouldn’t have been possible before. Slash is truly brushless ready with a waterproof digital steering servo, full ball bearings, metal gear transmission, Torque-Control™ slipper, planetary gear differential, and high-quality metal turnbuckles. Traxxas Slash is fully assembled and Ready-To-Race® for immediate out-of-the-box racing fun.

• Type: 2WD Short Course Truck
• Scale: 1/10th Scale
• Length: 22.36 inches (568mm)
• Width: Front & Rear Track 11.65 inches (296mm)
• Wheelbase: 13.2 inches (335mm)
• Weight: 76.2oz (2.16kg)
• Chassis: Composite Nylon Modified Tub
• Suspension: Long Front, XXLong Rear
• Tire Type: Slash 2.2"
• Motor or Engine: Titan® 12T 550 modified motor with internal cooling fan
• Speed Control: Waterproof XL-5 ESC
• Speed: 30+mph with 7-cell battery and included optional 23-tooth pinion gear
• Wheel Size: 2.2"
• Kit/RTR: RTR

• 17mm aluminum splined wheel hubs and nuts
• Large capacity 150cc fuel tank
• Single digital high-torque ball bearing servo
• Hard anodized Teflon coated GTR shocks with TiN shock shafts
• New 17mm hex Split-Spoke mirror-chrome wheels with pre-glued on 3.8" talon Tires
• New steel retainer rings
• Oversized wheel bearings & reinforced axle carriers
• Compact RX box accepts 4AA alkaline batteries or a 5-cell flat rechargeable RX pack (sold separately)
• Integrated personal transponder mount
• High flow dual-stage air filter
• Polished Resonator dual chamber tuned pipe
• Two-speed forward only transmission
• New body graphics
• TRX 3.3 Racing Engine
• 3 channel Radio System

The award-winning Traxxas Revo® 3.3 is an engineering triumph that delivers the ultimate in uncompromising performance, tuning, and durability. A vehicle so advanced, so innovative, nineteen patents were needed to cover it all. The new chassis layout borrows from the exclusive Revo Platinum Edition with race-inspired features such as a compact receiver box that includes an integrated personal transponder mount for race day. The legendary high revving power of the national championship winning TRX 3.3 Racing Engine drives a low mass 2-speed transmission for amazing accelerationand 45+ mph speeds.  Time and time again, Revo has provem the benefits of its visionary design, and the newest Revo continues the legacy.  It is the only truck to win six concesutive national racing titles!

The newest Revo keeps sharp focus on core performance elements as the lightes, quickest, and most versatile Revo yet.  Only Revo has the latitude in performance and tuning adjustment to be both the pinnacle of monster truck performance and a superior racing platform.  World-class Traxxas engineering sets Revo apart. 

• Type: 4WD Monster Truck
• Scale: 1/10
• Length: 20.65" (525mm)
• Width: 16.38" (416mm)
• Wheelbase: 13.7" (348mm)
• Weight: 9.8lbs (4.448kg)
• Suspension: Fully independent Progressive 2 Rockers
• Drive Train: Shaft-driven 4WD
• Tire Type: Talon 5.75" X 3.8"
• Motor or Engine: TRX 3.3 Racing Engine
• Radio: Traxxas TQ (2-Channel)
• Speed: 45+ MPH
• Wheel Size: 3.8" (97mm)
• Kit/RTR: RTR
• Shock Type: GTR™ Aluminum 3.43" (87mm)
• Fuel Tank Capacity: 150cc
• Recommended Environment: Outdoor

• Realistic short-course styling with tube-style bumpers and shock-absorbing nerf bars
• 50+mph top speed
• TRX 3.3 Racing Engine
• Polished Resonator dual chamber tuned pipe
• EZ-Start electric starting system
• Auto-shifting 2-speed transmission
• Torque-Control slipper clutch
• Sealed, Limited slip differentials
• Large-capacity 150cc fuel tank
• GTR threaded-body aluminum shocks
• Installed progressive 2 rockers
• Titanium-anodized 3D Semi-Monocoque aluminum chassis
• Compact RX box accepts 4AA alkaline batteries or a 5-cell rechargeable RX pack (sold separately)
• Digital high-torque ball bearing servo
• 4-channel micro receiver
• Hex hardware
• High flow dual-stage air filter

The new Traxxas Slayer Pro 4WD Short Course Race Truck takes realism, speed, and competition to the next level with 4-wheel drive, nitro-burning performance. Slayer brings the action and ferocity of Pro 4® Championship Off Road Racing™ right into your own back yard. Strap yourself in and get ready for intensity and realism that’s unrivaled in the Nitro arena. This latest addition to Traxxas’ stable of high-performance trucks is based on the 6-time national champion Revo chassis and suspension technology, complete with rocker-actuated inboard shocks, 3D Semi-Monocoque chassis, and high-revving TRX 3.3 engine with EZ-Start electric starting system. Slayer features new suspension arms that give the truck an authentic racing stance and the proper proportions of a true Pro 4WD short-course racer. A compact receiver box with integrated transponder mount, high-flow air filter, polished Resonator tuned pipe and GTR aluminum shocks are just a few of the features Slayer incorporates for maximum performance, reliability, and fun. No other R/C truck combines realistic looks, authentic handling, and Traxxas’ legendary durability and convenience like the Ready-to-Race® Slayer.

• Type: Short Course Race Truck
• Scale: 1/10th
• Length: 22.36 in (568mm)
• Wheelbase: 11.65 in (296mm)
• Weight: 7.47lbs (3.39kg)
• Chassis: 3mm, 6061-T6 Aluminum
• Suspension: Fully independent Progressive 2 Rockers
• Drive Train: Shaft-Driven 4WD
• Radio: Traxxas TQ™ (2-Channel)
• Speed: 50+mph (with optional gears)
• Kit/RTR: RTR
• Fuel Tank Capacity: 150cc

• Completely ready-to-fly
• Durable Z-Foam™ construction
• Included DX5e transmitter and AR500 receiver
• 3S 3200mAh Li-Po battery included
• Li-Po balancing charger included
• Tricycle landing gear
• 15-size brushless outrunner motor installed
• E-flite 30A Pro Switch-mode BEC Brushless ESC installed
• All electronics installed

Looking to learn to fly? With the assistance of a club instructor, the E-flite® 
Apprentice™ 15e RTF is the perfect trainer for learning the basics and beyond. The Apprentice is a 15-size high-wing trainer that comes with everything you need to go from buy to fly. This one-box purchase includes the full range DX5e Spektrum™ radio with the 2.4GHz interference-free technology, AR500 receiver, and a 3S 3200mAh 15C Li-Po battery and charger.  There is no building required—just charge and install the included battery, mount the wing and tail, and fly.

The Apprentice is powered with a 15-size brushless outrunner providing excellent power and performance. This trainer has a flat-bottom wing and produces gentle flight characteristics.  The Apprentice is made from durable, lightweight Z-Foam™, making it great for training and sport flying. Every beginner pilot experiences their share of bumps and bruises, so the Apprentice's durable build and easily repairable construction ensures more opportunities for success. The Apprentice is the perfect training aircraft thanks to its gentle flight characteristics. This model is equipped with tricycle landing gear allowing better ground handling over tail-dragger aircraft. This landing gear setup is durable and will also allow takeoffs and landings on maintained grass runways. This is a high quality trainer with an excellent setup, taking the pilot from beginner to basic aerobatics all from this one-box purchase. Go from buy to fly with the Apprentice.

• Wingspan: 58 in (1475mm)
• Overall Length: 37 in (940mm)
• Wing Area: 525 sq in (33.7 sq dm)
• Flying Weight: 40–45 oz (1135–1275 g)
• Motor Size: 15-size brushless outrunner (installed)
• Servos: 4 servos (installed)
• Trim Scheme Colors: White Z-Foam with red, black and silver decals
• CG (center of gravity): 3-1/4" (83mm) back from the leading edge
• Wing Loading: 12 oz/sq ft
• Prop Size: 11 x 8 electric (installed)
• Speed Control : 30A Brushless Pro SB Brushless ESC (EFLA1030) (installed)
• Recommended Battery: 3200mAh 3S 11.1V 15C Li-Po (EFLB1040) (included)
• Approx. Flying Duration: 15 minutes
• Approx. Assembly Time: 30 minutes
• Charger: 3S Balancing Li-Po Charger (EFLC3010) (included)
• Experience Level: Beginner
• Radio: Spektrum DX5e 2.4GHz (included)
• Is Assembly Required: Yes

• Ready to fly out of the box—just needs to be bound to DSM2 aircraft transmitter (not included)*
• Includes high performance 110mAh LiPo battery, charger, and batteries for charger
• True 4-channel control is ideal for experienced pilots
• Includes Spektrum's innovative AR6400 receiver
• Lightweight, durable and easy-to-repair EPS construction

You’ve never seen anything this small that flies so big. As the first 4-channel Ultra-Micro™ flyer to utilize Bind-N-Fly™ DSM2™ technology, the Sukhoi Su-26m will thrill experienced pilots with its amazing aerobatic capabilities. Based on a Mike McConville design, this exciting addition to ParkZone’s family of Ultra-Micro aircraft definitely doesn’t fly like a toy. Instead, it gives you the feel of being at the flying field, and its incredibly lightweight Spektrum AR6400 receiver and ESC board provide further value and convenience. An additional servo also plugs into the board to drive the Sukhoi’s ailerons.

The Sukhoi has been engineered for a true 4-channel experience, with its remarkable precision control making it perfect for flight in a large yard or gymnasium or even a park on a calm day. To start, all you need to do is charge the included 110mAh Li-Po battery and bind the plane to one of the many compatible DSM2 transmitters*.  From rolling circles, loops and snap rolls to aileron rolls, spins and inverted flight, the maximum aerobatic performance of the Ultra-Micro Sukhoi Su-26m is unlike anything else this size.

After spending the day out at the field, unwind with ParkZone’s 4-channel Sukhoi Su-26m, offering you more flying challenges and capabilities than you ever thought possible in an Ultra-Micro flyer.

NOTE: For the best performance from your Sukhoi, recommended transmitters include Spektrum™ DX5e, DX6i, DX7, DX7se, JR® X9303, and 12X as well as Spektrum module systems.  For more information on Bind-N-Fly™ and compatible transmitters, please visit www.bindnfly.com.

• Wingspan: 15.75 in (400mm)
• Overall Length: 14.25 in (366mm)
• Flying Weight: 1.1 oz (34 g)
• Radio: Spektrum AR6400 receiver (installed), 5+ channel 2.4GHz transmitter with Spektrum DSM2 (required)
• Charger: DC single-cell LiPo

• Completely assembled and tested at the factory
• Capable of sport flying and 3D aerobatics right out of the box
• Includes Spektrum’s DX6i 2.4GHz DSM2™ 6-channel computer programmable transmitter and factory-installed AR6100e Microlite receiver
• DS75 Digital Sub-Micro servos and G110 Micro Heading Lock gyro offer precise and powerful control
• 420H brushless motor, 25-amp brushless ESC and 3S 11.1V 1800mAh 20C LiPo battery deliver incredible power and performance
• CCPM control with push-pull elevator and direct-to-swash aileron/pitch linkages
• Stainless steel flybar, main shaft and tail shaft

The Blade® 400 3D is designed to give intermediate to advanced heli pilots a ready-to-fly experience like no other. It comes 100% factory built and flight tested so you can get flying right away. There is nothing left to assemble or set up. The Blade 400 3D is ready for hovering and 3D aerobatics as soon as you finish charging the battery. And you can fly it just about anywhere, anytime thanks to the included Spektrum™ 2.4GHz DX6i radio system that avoids interference with other RC users, even those on other 2.4GHz systems. You also get the benefit of the DX6i’s advanced DSM2™ protocol that provides the kind of locked-in, solid response that will let you fly even the most demanding 3D maneuvers with absolute precision.

The Blade 400 3D is the first ready-to-fly mini-heli to come equipped with Spektrum’s advanced DX6i 2.4GHz DSM2 6-channel programmable computer aircraft system. Besides providing freedom from frequency restrictions and interference, the DX6i’s DSM2 technology offers other unique advantages like faster control response and innovative features such as ServoSync™. ServoSync automatically resequences transmitted data so mixed servos receive their pulses at the same time so you can fly extreme 3D aerobatics with absolute precision. The system also includes the feather-light, 4.4-gram Spektrum AR6100e Microlite Receiver.

Other DX6i features include:
• Full-range capability
• 10-model memory
• Heli and airplane programming
• Two types of swashplate mixing: standard or 120º CCPM
• 3-axis dual rates and exponential
• Travel adjust
• Servo monitor
• Two 5-point throttle curves
• Three 5-point pitch curves
• Revo mixing
• Gyro sensitivity programming
• Two programmable mixes

The DX6i is not only perfectly suited for the Blade 400—it can also be used to fly just about any size and type of model due to its full range and programming capabilities.

E-flite uses top-quality engineering and materials in everything it makes, so you always get the maximum level of value and fun. And E-flite backs all of its products with the best customer service and support in the hobby so your electric flight experience is always a positive one.

• Type: RTF Electric 3D Mini Heli
• Main Rotor Diameter: 28.2 in (718mm)
• Tail Rotor Diameter: 5.3 in (135mm)
• Gross Weight: RTF with LiPo battery, 23.5 oz (665 g)
• Length: 25.6 in (650mm)
• Motor Size: 420H brushless outrunner, 3800Kv
• Kit/ARF/RTF: RTF
• Control System: Spektrum™ DX6i 2.4GHz DSM2™ computer programmabe transmitter (included), Spektrum AR6100e Microlite receiver (installed), DS75 digital Sub-Micro servos (4 installed), 120-degree CCPM
• Rotor Blade Length: 12.8 in (325mm)

• Scale, extended cab detailed truck body
• Detailed, realistic tube-style chassis
• Front and rear skid plate for scale appearance and protection
• Realistic vertical (standup) front and rear silver with blue highlighted anodized shocks
• 320-Series chrome wheels with low profile all-terrain tires
• Easy-access battery compartment accommodates standard 6-cell NiMH packs
• Reliable planetary gear differential for increased durability
• Captured rod ends for less ball pops and increased suspension durability
• Losi 27MHz AM receiver and transmitter available in six frequencies
• LM-32K performance motor for great speed acceleration
• 12RB Electronic Speed Control with reverse to back out of undesired situations

Losi’s ready-to-run 1/10-scale HIGHroller Lifted Truck is a tough lifted and modified customizable truck with an ultra-realistic look.

Losi equipped the 1/10 HIGHroller with an LM-32K Losi motor and a Losi 12RB electronic speed control (ESC) for the ultimate combination of power and speed. The installed 27MHz Losi radio system provides simple, effective control on any terrain. The easy access battery compartment accommodates 6-cell NiMH battery packs, and allows for quick, simple battery changes.

The 1/10 HIGHroller’s suspension design mimics the layout of full-scale lifted trucks, complete with vertically mounted, anodized aluminum shocks. The anodized shock bodies offer a custom look in addition to being fully functional. The oil-filled shocks smooth out the roughest terrain and allow the 1/10 HIGHroller to have its realistic lifted look.

In addition to the fully detailed extended cab truck body, the 1/10 HIGHroller is built on a tube-style truck chassis, complete with front and rear skid plates and stand-up shock arrangement. Custom, 320-series chrome wheels come equipped with low-profile all-terrain tires for a realistic look and go-anywhere traction.

• Type: Electric Off-Road Truck
• Scale: 1/10
• Length: 18.5 in (470mm)
• Width: 12.75 in (324mm)
• Wheelbase: 12 in (305mm)
• Chassis: Tube-Style
• Suspension: Four Wheel Independent
• Drive Train: Sealed 3-Gear Transmission
• Tire Type: Low-Profile, All-Terrain
• Motor or Engine: LM-32K Performance Motor
• Speed Control: Losi MSC12RB
• Radio: Losi MRX15 27MHz AM Receiver
• Batteries: 6-Cell NiMH with Tamiya-Style Connector (sold separately)
• Charger: Sold separately
• Wheel Size: 320-Series, Chrome
• Kit/RTR: RTR
• Shock Type: Oil-Filled, Anodized Aluminum
• Body: Fully Detailed, Extended-Cab Truck

• Complete RTR, everything included
• Extended chassis for increased stability and scale looks
• Fully independent suspension with friction dampers
• Differential-equipped transmission with adjustable slipper
• Powerful micro motor for quick acceleration and impressive top speed
• Digital proportional electronic speed control with reverse
• Losi 27MHz AM radio system included
• Micro-Desert grip tires mounted on black chrome, micro beadlock-style wheels
• Portable charger included (powered by included alkaline batteries)
• NiMH battery pack installed
• Includes 8 AA alkaline batteries for charger
• Includes 8 AA heavy-duty batteries for transmitter

Designed with the same award-winning features as the Micro-T™, the Micro-Desert Truck™ offers desert racing style in a micro truck that’s just under 6 inches long (about an inch longer than the Micro-T). Packed with an NiMH battery,  independent suspension, differential-equipped transmission and 27MHz Losi AM radio system, the Micro-Desert Truck has the speed and handling to tackle nearly everything you can throw at it. Take it with you anywhere you go and satisfy your RC cravings with the Micro-Desert Truck.

• Type: 2WD Desert Truck RTR
• Scale: 1/36
• Length: 5.7 in (145mm)
• Width: 3.5 in (89mm)
• Wheelbase: 3.5 in (89mm)
• Weight: 4.0 oz (112 g)
• Chassis: Extended composite tub
• Suspension: Independent
• Drive Train: 3-Gear transmission with gear diff and slipper
• Tire Type: Micro-Desert grip tires mounted on black, micro beadlock-style wheels
• Motor or Engine: Micro electric
• Speed Control: Electronic, fully proportional forward/reverse
• Radio: Losi 27MHz AM pistol
• Servos: Sub-micro
• Batteries: 4.8V 150mAh NiMH (included)
• Charger: Peak (included)
• Wheel Size: 0.75 in (19mm) diameter
• Kit/RTR: RTR
• Shock Type: Coil-over friction dampers
• Body: Factory-decorated Desert Truck (3 colors: red, blue and grey)
• Ball Bearings: BB-Equipped transmission
• Minimum Age Recommendation: 14 years
• Experience Level: Beginner
• Recommended Environment: Indoor
• Is Assembly Required: No

• Weather-sealed electronics
• Waterproof servos
• 4-channel micro receiver
• All-new single speed transmisson (2-speed optional)
• Revo-Spec sealed pivot ball suspension
• Revo-Spec sealed differentials
• Revo-spec sealed outer and center driveshafts
• All-new, low-CG chassis design
• Stronger chassis braces
• New transmission skid plate
• Scaleable battery compartments
• Snap-lock battery hold downs
• Dual-servo steering system
• Hex hardware throughout
• 3.8" mirror chrome twin-spoke wheels
• 3.8" Maxx chevron tires
• Engineered for running in wet conditions
• Brushless Ready
• 2-channel radio system
• EVX-2 Electronic Speed Control

The new Traxxas E-Maxx takes 4WD monster truck thrashing to the next level of fun and excitement.  Along with the incredible 16.8-volt EVX-2 dual motor power system, key improvements have been engineered into the suspension, driveline, chassis, and electronics to make this the toughest, most vesatile E-Maxx ever.   

• Type: 4WD Monster Truck
• Scale: 1/10
• Length: 20.4" (518mm)
• Wheelbase: 13.2" (335mm)
• Weight: 148oz. (4.18kg)
• Drive Train: Shaft-Driven 4WD
• Motor or Engine: 2- Titan&#reg; 550 Fan Cooled (21-Turn)

• Completely built and ready to fly in minutes
• Equipped with Spektrum’s DX5e 5-channel, full range 2.4GHz DSM2 radio system
• Hassle-free Evolution® Trainer Power System installed
• Easy-to-fly, traditional high-wing trainer perfect for first-time pilots
• Super-stable, self-righting flight characteristics
• Hangar 9 quality balsa and plywood construction

Thousands of pilots have earned their wings with the Hangar 9® Alpha™ trainer. Now, Hangar 9 introduces an updated version of this ever-popular traditional high-wing trainer with the added benefit of DSM2™ technology that provides freedom from frequency restrictions and interference. And, this Alpha has a completely modernized look that makes it a great-flying and great-looking aircraft.

The Alpha 40 DSM2 RTF is the first glow trainer to come equipped with Spektrum’s advanced DX5e 2.4GHz DSM2 5-channel full range aircraft system. Besides providing freedom from frequency restrictions and interference, the DX5e’s DSM2 technology offers superior performance with a secure link for glitch-free performance.  The system also includes the Spektrum AR500 receiver.

Other DX5e features include:
• Full range capability
• Secure link for glitch-free performance
• HI and LO rates for beginner and advanced pilots
• Servo reversing
• Delta wing mixing
• Digital trims
• Includes 4 AA Alkaline batteries 
• Audible low voltage warning
• LED voltage display 
• Charge jack for Ni-MH batteries
• Compatible with all existing Spektrum aircraft receivers

The DX5e is not only perfectly suited for the Alpha 40—it can also be used to fly just about any type of model where 5 channels are appropriate due to its full range capabilities.

With the ready-to-fly Alpha Trainer from Hangar 9, success is all but assured, thanks to its gentle, beginner-friendly flight characteristics and the ingenious, hassle-free Evolution Trainer Power System that makes the Alpha the easiest-starting, smoothest-running trainer available. With the engine and radio gear installed, the Alpha 40 is ready to fly in just minutes. This easy-to-fly trainer is perfect for first-time pilots because of its super-stable, self-righting flight characteristics. And, club instructors will find the Alpha 40 to be the most valuable tool for teaching new pilots the basics of RC flight.

• Wingspan: 63 in (1600mm)
• Overall Length: 52.5 in (1334mm)
• Wing Area: 710 sq in (45.8 sq dm)
• Flying Weight: 5.25 lb (2.4 kg)
• Engine Size: Evolution Power Trainer System (installed)
• Radio: Spektrum DX5e 5-channel 2.4GHz DSM2 system w/AR500 receiver (installed)
• Servos: Hangar 9 standard servos (installed)
• Trim Scheme Colors: White (U870), Black (U874), Orange (U877) & Silver (U881)
• Prop Size: Evolution 3-Blade Trainer System Propeller (included)
• Spinner Size: 2 in (included)
• Approx. Flying Duration: 10–12 minutes
• Experience Level: Beginner
• Assembly Time: Less than 1 Hour

• Officially licensed from Ellstrom Manufacturing
• Powerful, water-cooled brushless motor for intense speed
• Extended flex shaft drive system
• Water-cooled brushless ESC offers unsurpassed reliability
• Waterproof quick-access radio compartment
• Magnetic hatch allows easy and secure access to batteries and electronics
• Pro Boat® 2-channel AM pistol-grip radio installed

With speeds normally reserved for nitro boats and the simplicity of brushless electric power, the Miss Elam Brushless RTR brings a whole new level of ease to the RTR segment. Pro Boat’s powerful brushless electric motor propels the Miss Elam BL to speeds that rival the record-holding full-size boat, and Pro Boat’s unique magnetic hatch allows quick and easy access to the electronics while protecting them from the elements. The authentic hydro hull is handcrafted from fiberglass and utilizes an offset rudder that provides precise, predictable handling.

Completely ready-to-run with water-cooled brushless motor, programmable electronic speed control and radio system installed, the Miss Elam Brushless is an incredibly detailed and realistic boat that takes radio control excitement to the next level.

The Miss Elam is built under license from Ellstrom Manufacturing.

• Length: 27.5 in (699mm)
• Beam: 14 in (356mm)
• Motor Size: A3630-1500 Water-cooled brushless
• Radio: Pro Boat pistol-grip 27MHz AM (installed)
• Hull Material: Fiberglass composite
• Hull Type: Hydroplane
• Kit/RTR: RTR
• Scale: 1/12
• Drive System: Direct-drive, flex shaft
• Recommended Environment: Outdoor

• Pre-built version of the award winning AX10 Scorpion Kit. Includes all the aluminum links in anodized orange
• Pre-printed orange XC-1 Body that was specifically designed for competition rock crawling - meets 2.2 class rules.
• Pro-Line M2 Hammers tires are designed to resist side-wall tire rollover and utilizes a super soft M2 compound. Pro-Line Memory Foams allow for greater tire flex, added stability, larger contact patch, and less bounce action.
• Rear axle lockouts prevent hang-ups on the rear axle.
• Heavy duty sintered lockers front and rear
• High clearance lower links installed on the rear to prevent hang-ups on the rocks.
• Matte chrome 8 hole beadlocks with orange rock rings. Re-use your wheel. No messy glue required.

The Axial AX10 Scorpion 1/10, 4WD Electric, R/C Rock Crawler ARTR (Almost Ready-to-Run). Just add your choice of electronics, and you'll be able to hit the rocks in shorter time than having to build your entire crawler.

The ARTR was designed from the ground up, and every detail was thought through to provide a competition level base kit to work with. Previously the only way to build a competition capable rock crawler was to buy bits and pieces of several different kits here'n'there. This long and sometimes frustrating process could take as long as several months just to get the right parts together before you could even start the build. Now you can get a factory built rolling chassis, and within approximately an hours build-time you'll be able to hit the rocks with your competition ready AX10 Scorpion rock crawler.

• Type: Rock Crawler
• Scale: 1/10
• Width: 10 in (254mm)
• Wheelbase: 12-12.6 in (304mm - 320mm)
• Weight: 3.5 lb
• Chassis: Aluminum
• Suspension: 3 Link
• Tire Type: Pro-Line M2 Hammer
• Motor or Engine: Electric 540/550
• Radio: 2 Channel
• Servos: Standard Size
• Batteries: 7.2V Stick Pack
• Wheel Size: 2.2 8 Hole
• Kit/RTR: ARTR
• Shock Type: Super long nitride coated shocks
• Body: 1:1 rock buggy
• Gender: Unisex
• Is Assembly Required: Yes